Sunday, March 21, 2010
#008 01 Dr. Bank's Office - Drawing Modification
After spending all morning in the doctor's office getting medicine for bronchitis, most of my afternoon is shot because of the affects of the codeine cough syrup. Building models is just not possible.
I did modify the Dr's office today. One layer of the fire blocks was removed on each wall, leaving just one. This appears to be more prototypical. Here is the updated drawing...
I did modify the Dr's office today. One layer of the fire blocks was removed on each wall, leaving just one. This appears to be more prototypical. Here is the updated drawing...
Friday, March 5, 2010
#007 01 Dr. Bank's Office - DISASTER!!!
!@#$#@$%@#% I hate this kinda stuff! But it happens. Every model I've ever built had a set back of some kind. The hours I put in to building two board by board walls just went up in flames. I properly mixed the silicone mold compound, but apparently it was too old and it didn't set properly. Basically what you see above is a sticky, gummy mess. The boards cannot be removed from it.
Back to the drawing board. The good thing is that I can focus on doing a much better job this time around! We learn from our mistakes.
Learnings:
1. Throw old chemicals out, especially silicone mold compound and resins, after one year.
2. Only cast ONE WALL AT A TIME. That way you don't destroy both walls like I did.
3. Cut your loss. Don't be mad. Just laugh at it as experience and jump right back on the Chopper.
4. Don't show your friends that come over the cool mold you made and then let them see this mess.
Tuesday, March 2, 2010
NMRA Achievement Program Yahoo Group
NMRA Achievement Program Yahoo Group is a new way to find information, guidance and the sometime necessary kick-in-the-pants to help you earn your Achievement Program Certificates and become a MASTER MODEL RAILROADER.
If you are an NMRA member and would like to join, just go here…
I’m Scott Perry, long time Yahoo Group host and found of several groups such as…
Traintools
Trainbooks
HOGRR
And others!
So come join the fun, make new friends and make a plan to Achieve!
Scott Perry
http://modelrailroadersnotebook.blogspot.com/
Sunday, February 28, 2010
#007 01 Dr. Bank's Office - Casting the Walls
The framing is good. Not perfect, but acceptable for what I'm modeling. Looks like Scott needs to get new glasses, so I'll go see the doc next week.
What I want to do is to make molds of both sides so that I can produce more of these and use them as bunk houses. Since the frame takes alot of long and tedious work, we'll just cast them in plaster. We'll start with two sheets of .020 acetate since it was handy. You can use styrene or wood as well.
Next we remove the framing from the paper drawing. This is rather a pain in the but and I'm not sure I'll do this again. Next time I'll add a coat of wax paper.
There! All cleaned up and ready to be mounted to the mold frame.
Here is the acetate sheet. I like the clear material because it let's me see how well the master and casting dams are mounted, letting me check for gaps and leaks.
Using some 1/4" square basswood boards, I make a pinwheel dam. This is an easy way to build a dam that doesn't require a lot of accuracy in cutting and can be removed easily.
Done. Now I'll do the other one and let the glue dry. Note that Ailene's Tacky Glue was used liberally as wood and plastic don't always stick together. If the master is not fastened down properly it will float up into the silicone and be destroyed.
While our mold set dries, let's make some clap board. I'm using S scale 2" x 12" boards which come out to about a 1" x 9" board. The O scale 2 x 12 looked a little clunky, so I used this since I had it on hand. First I distressed the wood with a razor saw blade.
There is an exterior side and an interior side. Each has to be weathered differently. In order to keep track of sides I put a spot of red paint (or magic marker) on one end on one side.
Next I took a dull hobby knife and scored up the boards, even chopping some parts of the board away.
Damn! The Canadians beat the US in overtime. That was for the gold. Crap!
Here is where I "chunked" the board.
After I got through distressing the board, I gave it a light sanding to get rid of the fuzz.
Next I coated the exterior (red dot) side with Dr. Ben's Aged Driftwood Stain. This was done rather sloppily in order to get some randomness.
Then I weathered the interior side of the boards using Dr. Ben's Instant Age Stain. Again, I was sloppy and didn't make the wood too dark as it will be inside.
Once the boards were all weathered I placed them under a glass plate to dry and flatten out (the solvent in the stains will make them curl a bit.)
I sprayed the two masters with Testor's Dullcoat and let them dry. Later in the evening I came back and mixed up some Alumilite HS3 Silicone Mold Making Compound. This is a small kit that I keep around but often I buy it by the bucket.
You have to follow the directions carefully or it won't solidify. I'm kind of worried about this batch since the material is over a year old. I mixed 5 oz of white and a 1/2 oz of red activator.
The batch was mixed THOROUGHLY and air bubbles were allowed to escape.
I poured the silicone mold maker into the frames very slowly to help air bubbles escape We'll let both molds cure for 24-48 hours. This is a thin mold, so 24 should be enough. We'll take the wood frame out and make a casting to test the mold.
That's all for now!
Labels:
01 Dr Banks Office,
mold making,
Weathering
Thursday, February 25, 2010
#001 06 Dr. Bank's Office - Inside the Office
I've had a bad night with my little one and finally have her in bed. Jeez....what a night.
I'm too tired to model, so let's do some planning. All of the photos I collected are now in a binder and one thing I need to do is to come up with a list of details to put inside the Doctor's office. My plan is to scratchbuild most of them. We'll just look at each picture and write down what we see.
Dr.'s Office Contents - Uncut
The roll top desk will be a focal point, as will the exam table and curtain. I expect to make the lamps really work using fiber optics. Many of the details might have to be attached to the wall or floor before assembly.
Figures...
Finding a Doctor might be harder than I thought, at least the white coated kind. Naturally I checked out Arttista at http://www.arttista.com/ first. I also sent a note to my friend Alan Pollock at Fun & Games (The People People) to see if he has them. We'll see what they both come back with. Probably post it on the On30 Conspiracy Yahoo Group as well.
Blue Mountain contacted me off line, but they don't have a doctor. In fact, nobody seems to have a doctor! What's up with that? Ok, time to get out the carving tools and make a greenie. I hate carving figures, but this one is too key to the model. I need the practice anyway.
I'm too tired to model, so let's do some planning. All of the photos I collected are now in a binder and one thing I need to do is to come up with a list of details to put inside the Doctor's office. My plan is to scratchbuild most of them. We'll just look at each picture and write down what we see.
Dr.'s Office Contents - Uncut
- Eye chart
- Roll top desk
- Rolling chair
- Patient chair
- Exam table
- Glass cabinet for medical books
- Wall telephone box
- Magnifying glass
- Small stove
- Kettle
- Clock
- Skeleton on hanger
- Cabinet for tools - glass
- Cabinet for medicines - wood
- Doctor's bag
- Medicine bag
- Lunch basket
- Coat rack w/ hat & coat
- Jars with bandages, cotton balls, etc
- Oil lamp(s)
- Dental chair
- Medicine bottles
- Mortar & pestle
- Scales - balance
- Crutches
- Picture of Hippocrates
- Water bowl and towels for hand cleaning
- Patient
- Doctor Banks
- Balance scale for people weight
- Diploma in frame
- Candle
- Doctor's instruments
- Patient screen
- Whiskey
The roll top desk will be a focal point, as will the exam table and curtain. I expect to make the lamps really work using fiber optics. Many of the details might have to be attached to the wall or floor before assembly.
Figures...
Finding a Doctor might be harder than I thought, at least the white coated kind. Naturally I checked out Arttista at http://www.arttista.com/ first. I also sent a note to my friend Alan Pollock at Fun & Games (The People People) to see if he has them. We'll see what they both come back with. Probably post it on the On30 Conspiracy Yahoo Group as well.
Blue Mountain contacted me off line, but they don't have a doctor. In fact, nobody seems to have a doctor! What's up with that? Ok, time to get out the carving tools and make a greenie. I hate carving figures, but this one is too key to the model. I need the practice anyway.
Wednesday, February 24, 2010
#001 05 Dr. Bank's Office - Framing
I'm using two new tools on the workbench tonight. You can read my review here...
http://traintools.blogspot.com/
We're still framing the two long walls tonight. The new Chopper II should allow me to get better cuts than I was getting on the old unit. Let's see...
The right wall is now partially framed and drying. The smaller boards are much more neatly cut than before. You'll notice that the studs are not lining up with the diagram. I actually had a hard time cutting the fire break boards to the proper dimension and so they are a bit long. It won't matter though.
The left wall is a mirror image of the right.
Darryl Huffman uses a wider pair of tweezers than I normally use, so I grabbed a pair out of my toolbox and gave them a try tonight. I do like them and find that I can hold a small piece for a longer time without my fingers cramping up. Might switch.
Here is the left side with all the framing in place. It went together well, so let's test fit the Grandt Line Window.
The window fits greats and will only need a little shimming, as does the prototype.
The right side is now done, and the window hole is the same dimension as the other wall.
Yup, the window fits! Good! The wall framing is done. The next step is to add a guide board and stain some clap board!
http://traintools.blogspot.com/
We're still framing the two long walls tonight. The new Chopper II should allow me to get better cuts than I was getting on the old unit. Let's see...
The right wall is now partially framed and drying. The smaller boards are much more neatly cut than before. You'll notice that the studs are not lining up with the diagram. I actually had a hard time cutting the fire break boards to the proper dimension and so they are a bit long. It won't matter though.
The left wall is a mirror image of the right.
Darryl Huffman uses a wider pair of tweezers than I normally use, so I grabbed a pair out of my toolbox and gave them a try tonight. I do like them and find that I can hold a small piece for a longer time without my fingers cramping up. Might switch.
Here is the left side with all the framing in place. It went together well, so let's test fit the Grandt Line Window.
The window fits greats and will only need a little shimming, as does the prototype.
The right side is now done, and the window hole is the same dimension as the other wall.
Yup, the window fits! Good! The wall framing is done. The next step is to add a guide board and stain some clap board!
Tuesday, February 23, 2010
#001 04 Dr. Bank's Office - Starting Construction of Walls
Let's make some sawdust! I bought a small pack of Midwest Products Scale Lumber Stock #8018 .0416 x .0833 x 11" 15 pc bag for $2.99. This will get me started on framing the 2 x 4 walls. I had the Trainmaster Models Hobby Shop order some more for me. Projects like this eat up scale lumber!
Since I wanted to work along with Darryl Huffman's Scratchbuilding In Wood DVD, I decided to move my work bench upstairs to the office and work in front of the computer. Normally I wouldn't do this but Marie is VERY pregnant and I like being close by the bedroom as she gets tired late at night and might need me.
Unlike Darryl, I like to work on glass plates. He uses laminated MDF boards. To me, glass is easier to clean and it is heavy so it doesn't move much. I use a 2' section of 1/4" think edged glass that came from a store shelving unit. It's been with me for years. To clean it I just scrape it with a razor scraper and then clean with Clorox's 409 Glass Cleaner or acetone (for paint). Instead of turning the square of wood around like Darryl, I just slide the plate glass left or right to work on the next section.
Here I have taped two drawing sections to the glass, one for each wall.
Using my well-worn NWSL Chopper I cut out the top plates and the studs. My chopper is shot so I need a new one. The razor has dug a hole in the masonite base plate and the boards are breaking instead of slicing. One of these days I'll have an extra $250 and will buy a Caliber Cutter. In the mean time I'll head over to the hobby shop and buy another chopper to hold me over. This one is 20+ years old.
Following Darryl's instructions on the DVD playing on my computer, I put in the top and bottom plates, the side studs and then begin filling in the fire blocks and studs. Darryl didn't use scale 2x4's. He used strip wood, 1/16" x 1/8". I think either is fine, but this model is for judging and I want to get it as right as I can.
Since my daughter plays in the office, I'll have to be careful cleaning up at night. The glass plate and the sharp tools all go up on a very high shelf.
...stay tuned!
Since I wanted to work along with Darryl Huffman's Scratchbuilding In Wood DVD, I decided to move my work bench upstairs to the office and work in front of the computer. Normally I wouldn't do this but Marie is VERY pregnant and I like being close by the bedroom as she gets tired late at night and might need me.
Unlike Darryl, I like to work on glass plates. He uses laminated MDF boards. To me, glass is easier to clean and it is heavy so it doesn't move much. I use a 2' section of 1/4" think edged glass that came from a store shelving unit. It's been with me for years. To clean it I just scrape it with a razor scraper and then clean with Clorox's 409 Glass Cleaner or acetone (for paint). Instead of turning the square of wood around like Darryl, I just slide the plate glass left or right to work on the next section.
Here I have taped two drawing sections to the glass, one for each wall.
Using my well-worn NWSL Chopper I cut out the top plates and the studs. My chopper is shot so I need a new one. The razor has dug a hole in the masonite base plate and the boards are breaking instead of slicing. One of these days I'll have an extra $250 and will buy a Caliber Cutter. In the mean time I'll head over to the hobby shop and buy another chopper to hold me over. This one is 20+ years old.
Following Darryl's instructions on the DVD playing on my computer, I put in the top and bottom plates, the side studs and then begin filling in the fire blocks and studs. Darryl didn't use scale 2x4's. He used strip wood, 1/16" x 1/8". I think either is fine, but this model is for judging and I want to get it as right as I can.
Since my daughter plays in the office, I'll have to be careful cleaning up at night. The glass plate and the sharp tools all go up on a very high shelf.
...stay tuned!
Subscribe to:
Posts (Atom)

